Yard tools
Rack fit
checker.
Pallet overhang on a beam is the leading cause of catastrophic rack failure, and it is almost always a dimension mistake made before anybody measured the bay. Four measurements and a load weight is all this needs.
- Footprint tested
- 48" × 40" GMA
- Positions per bay
- 2
- Required capacity
- 3,200 lb
- Recommended grade
- None — redesign
Quote request
Send us the bay and the load
Put the four measurements in the message field and we will specify the footprint, the grade and the repair standard that keeps it safe.
Verdict
48" × 40" GMA fits, but no grade we sell is safe at 3,200 lb.
Fit wire mesh decking, reduce the pallet load, or move to a purpose-engineered pallet. Do not run this position on a recycled deck.
Orientation options
| Orientation | Per bay | Depth needed | Verdict |
|---|---|---|---|
| 40.0" face out | 2 | 48.0" | Overhangs |
| 48.0" face out | 2 | 40.0" | Fits the depth |
Height arithmetic
| Step | Value |
|---|---|
| Clear height to the beam above | 60" |
| Less pallet height | −5.5" |
| Less clearance for entry and settlement | −4" |
| Usable load height | 51" |
Capacity against every grade
| Grade | Racked | Static | Meets 3,200 lb? |
|---|---|---|---|
| #2 recycled | Not advised | 3,200 lb | No |
| #1 recycled | 1,500 lb | 4,000 lb | No |
| A / Premium | 1,800 lb | 4,600 lb | No |
| New hardwood | 2,200 lb | 5,000 lb | No |
| EPAL block pallet | 2,200 lb | 8,800 lb | No |
Rules this tool applies
- No part of the pallet may project beyond the bay depth
- Load may overhang the deck by no more than one inch per side
- Racked capacity is roughly a third of static capacity
- Wood creeps: three months or more means a 2.0 factor
- Wire decking converts the position to a static one
- Plugged #2 decks are never racked unsupported
Other clearances worth checking
- Flue space, back to back
- ≥ 6"
- Beam span for two 48×40
- ≥ 96" clear
- Minimum fork entry height
- 3½"
- Loaded 48×40 through a door
- ≥ 50" clear
- Sprinkler clearance to load
- Per your fire code
- Upright damage tolerance
- Inspect quarterly
Yard reference
Every number we publish, in one place
The same appendix appears at the foot of our reference pages so you never have to leave an article to check a figure. All of it is revised annually and matches the constants used by the Carbon Ledger.
Stock specification
- Stock footprint
- 48" × 40" (1219 × 1016 mm)
- Deck height, GMA stringer
- 5½" (140 mm)
- Deck height, block pallet
- 5¾" (146 mm)
- Deck height, EPAL 1
- 144 mm
- Board thickness, nominal
- ⅝" (16 mm)
- Top deck boards, #1 grade
- 6–7
- Bottom deck boards, #1 grade
- 4–5
- Stringers per pallet
- 3, notched or solid
- Species
- Mixed hardwood, oak-dominant
- Mass, recycled 48×40
- 33–42 lb / 15–19 kg
- Mass, new 48×40
- 37–48 lb / 17–22 kg
- Mass, EPAL 1
- 22–25 kg / 49–55 lb
- Moisture ceiling at dispatch
- ≤ 19%
- Fasteners
- Helical-thread 2½"
Typical values for our 48×40 recycled stock. Exact board counts vary by grade and batch.
Grades, side by side
| Grade | Top / bottom boards | Repairs allowed | Static | Dynamic | Racked | Price index |
|---|---|---|---|---|---|---|
| A / Premium | 7 / 5 | None visible | 4,600 lb | 2,800 lb | 1,800 lb | 42–52 |
| #1 Grade | 6–7 / 4–5 | Full-length companions | 4,000 lb | 2,500 lb | 1,500 lb | 30–40 |
| #2 Grade | 5–6 / 3–4 | Plugs and companions | 3,200 lb | 1,800 lb | Not advised | 20–28 |
| Core / Mixed | As arrived | Unsorted | Unrated | Unrated | No | 12–20 |
| New hardwood | 7 / 5 | n/a | 5,000+ lb | 3,000 lb | 2,200 lb | 100 |
| Heat-treated #1 | 6–7 / 4–5 | Companions, re-treated | 4,000 lb | 2,500 lb | 1,500 lb | 38–48 |
Footprints we stock or build
| Footprint | Metric | Known as | Typical use |
|---|---|---|---|
| 48" × 40" | 1219 × 1016 mm | GMA / grocery standard | General distribution, grocery |
| 42" × 42" | 1067 × 1067 mm | Square 42 | Drums, paint, telecom |
| 48" × 48" | 1219 × 1219 mm | Drum pallet | 55-gallon drums |
| 40" × 48" | 1016 × 1219 mm | Rotated GMA | Military, construction |
| 48" × 42" | 1219 × 1067 mm | Chemical / produce | Chemicals, produce |
| 40" × 40" | 1016 × 1016 mm | Dairy square | Dairy, beverage |
| 36" × 36" | 914 × 914 mm | Beverage | DSD, retail display |
| 48" × 20" | 1219 × 508 mm | Retail half | Aisle-end displays |
| 1200 × 800 mm | 47.2" × 31.5" | EUR / EPAL 1 | European export |
| 1200 × 1000 mm | 47.2" × 39.4" | ISO / EPAL 2 | ISO export lanes |
Handling and rack dimensions
| Dimension | Typical value | Note |
|---|---|---|
| Fork length | 42"–48" | Must not protrude beyond the far side of a 48" pallet |
| Fork width | 4"–6" | Wider forks spread load across deck boards |
| Fork thickness | 1½"–2" | Determines minimum pallet entry height |
| Fork spread, GMA entry | 24"–27" centres | Between the stringers of a three-stringer pallet |
| Pallet-jack wheel path | 6½" clear | Why notched stringers do not admit jacks |
| Minimum entry height | 3½" | A crushed bottom deck blocks the forks entirely |
| Rack beam span, two pallets | ≥ 96" clear | For two 48×40 pallets, 40" face out |
| Flue space, back to back | ≥ 6" | Most fire codes; check your jurisdiction |
The life of one deck, stage by stage
| Stage | Typical duration | What happens | Carbon position |
|---|---|---|---|
| Timber to pallet | Weeks | Sawn, nailed, often shipped wet | 12.6 kg CO₂e embodied |
| First life | 2–4 years | Hardest service; lead board usually fails | Credit begins at reuse |
| First repair | 2 minutes | Lead board replaced with salvaged stock | +1.8 further lives on average |
| Second to fifth life | 6–12 years | Grading, companions, re-nailing, re-grading | 11.6 kg CO₂e avoided per cycle |
| Structural retirement | — | Stringers rotted or deck beyond rebuild | Stored carbon still retained |
| Repurposed | Decades | Collars, crates, table tops, cladding | Carbon stays in the material |
| Fiber | 1–3 years | Mulch or bedding, then soil | Released slowly |
| Thermal | Immediate | Boiler-grade chip | Released at once — last resort |
Conversions we use daily
| From | To | Multiply by |
|---|---|---|
| Inches | Millimetres | 25.4 exactly |
| Pounds | Kilograms | 0.4536 |
| Short tons | Metric tonnes | 0.9072 |
| Cubic yards | Cubic metres | 0.7646 |
| Ton-miles | Tonne-kilometres | 1.4594 |
| °F to °C | — | (°F − 32) × 5⁄9 |
| Board feet | Cubic metres | 0.00236 |
| lb/ft³ | kg/m³ | 16.018 |
Glossary — thirty terms worth knowing
- Core
- A used pallet bought for grading — the currency of the industry.
- Deck board
- Any board on the top or bottom face of a pallet.
- Lead board
- The outermost deck board at each end; absorbs every fork entry.
- Stringer
- The long member running the length of a stringer pallet; usually three.
- Stringer board
- On a block pallet, the board that ties the blocks together.
- Block
- One of the nine supports in a block pallet.
- Notch
- The cut-out in a stringer that creates four-way fork access.
- Chamfer
- A bevel on a lead board's lower edge to ease fork entry.
- Companion
- A full-length board nailed alongside a damaged stringer. A strong repair.
- Plug / scab
- A short piece fixed over a break. A weaker repair; #2 grade here.
- Re-nail
- Restoring the fastener pattern on a loose but intact pallet.
- Regrade
- Moving a pallet between grade lanes after inspection.
- Down-cut
- Re-cutting a larger deck into a smaller footprint.
- Static load
- Capacity at rest on a flat, continuous surface.
- Dynamic load
- Capacity while being lifted and moved.
- Racked load
- Capacity spanning beams with no deck support. Always the smallest figure.
- Unit load
- Pallet, product and wrap considered as one structure.
- Overhang
- Load or deck projecting beyond its support. The leading cause of rack failure.
- Flue space
- The gap between back-to-back rack bays; six inches minimum in most codes.
- GMA
- The Grocery Manufacturers Association 48×40 specification.
- EPAL
- The licensing body for the European 1200×800 block pallet.
- ISPM-15
- The international phytosanitary standard for wood packaging.
- HT
- Heat treatment: 56 °C at core for 30 minutes.
- IPPC mark
- The wheat-sheaf stamp evidencing phytosanitary treatment.
- Collar
- Four hinged timber sides that turn a pallet into a container.
- Top cap
- A lightweight cover protecting the uppermost layer of a stack.
- Dunnage
- Timber used to fill voids, brace loads and spread point loads.
- Fiber
- Ground wood: mulch, animal bedding or boiler-grade chip.
- Diversion rate
- Share of intake kept out of landfill. Ours is 100%.
- Reuse rate
- Share of intake that leaves as a pallet. Ours is 94%.
Next step
Send the four measurements
We will specify the footprint, the grade and the repair standard — and tell you if wire decking is the cheaper fix.
Quote request
Let's price your pallets
The same desk, the same people, whatever page you came from. Give us the volume and the grade and we'll come back with availability, price and the next trailer out.
Yard9869 Meeks Blvd, St. Louis, MO 63132
HoursMon–Thu 7:00–5:00 · Fri 7:00–3:30 · Sat 8:00–12:00 CT